Morgood Tools, Inc.
Rochester, NY

We had a differential that was taken undersize on one dimension. By applying the tungsten carbide on the problem area, we were able to regrind the dimension and make it within the desired tolerance. Also, the customer was very impressed with the application of the Rocklinizer and its ability to salvage undersized dimensions.

Another example of the worth of the Rocklinizer was when a number of parts were taken undersize on an inside diameter of a gear. The parts were only a few ten thousandths out of tolerance. By applying the tungsten carbide to the diameter we were able to use the parts and not scrap any of them. Just in those two scenarios Morgood Tools was able to save significant time and money.

From adding a better gripping surface to collets to building up undersize drill shanks, it has performed well. We have also used it to build up oversize conditions on the I.D. of bearings and fixtures.

The ability of the Rocklinizer to add as little as .0001” has been a very useful tool.

We would just like to thank your company for making a quality product with many different applications.

Robert Martin, Quality Inspector
John Gunn, Q.A. Manager

SEE CLIENT TESTIMONIALS »
 


Join us at the Offshore Technology Conference (OTC) 2017
May 1-4, 2017 | NRG Park | Houston, TX, USA
 

Join us at Amerimold 2017
June 14-15, 2017 | Chicago (Rosemont), IL, USA
 

Join us at EMO Hannover 2017
September 18-23, 2017 | Hanover Exhibition Grounds | Hannover, Germany
 

Join us at FABTECH 2017
November 6-9, 2017 | McCormick Place | Chicago, IL USA