MOLDMENDER MICROWELDER

Mold & Die Repair Equipment repairs molds and dies
made of steel.

 


ORDER MOLDMENDER PARTS ยป




Mold and die repairs are made by bonding a piece of .008" thick ferrous ribbon material or .010" or .020" diameter wire or metallic paste / powder to the desired areas on a steel workpiece.

The ribbon material or wire usually is in the annealed state before microwelding, but will be in the hardened state after being bonded in place. The hardness of the microweld will vary of course, according to what material is used in the repair, which should have the same or similar properties as the workpiece. Stainless steel, nickel alloys, and mold steels, such as P-20, S-7, A-2, and 420 stainless are some of the more commonly repaired materials.

METALLIC MICROWELDING MATERIALS
A-2
H-13
INCONEL
M-2 (D-2)
NICKEL
0-1
P-20 (NAK)
S-7
W-2
STELLITE
17-4 PH
312 SS
316 SS
410 SS
420 SS