ROCKLINIZER CARBIDE APPLICATION EQUIPMENT

Applies Tungsten Carbide, Titanium Carbide and Rockhard electrode material to metals, tools and dies.

  


ORDER ROCKLINIZER PARTS »



The Rocklinizer uses three types of electrodes to apply a hard and wear resistant surface.

Tungsten Carbide is applied to high speed steel and other metal surfaces to prolong useful life and reduce wear.

Titanium Carbide alleviates structural drawbacks of carbide tools and inserts. This seals the compressed carbide and binder particles for a homogeneous and longer lasting surface.

Rockhard electrodes build up materials, reclaim undersized tools by restoring tolerances, provide gripping on collets and clamping blocks, and maintain dimensions on bearings, shafts, and other metal surfaces.

The end result of this surface treatment is to increase productivity and reduce costs. When tools and dies remain in operation without replacement due to wear, there will be less machine downtime, operator idle time, set-up, inspection time, and the expense of new or resharpened tools and dies.

These savings justify the purchase of the Rocklinizer.

Rocklin Manufacturing Co. offers a full line of Rocklinizer parts and accessories. To place an order, simply fill out our online form or contact Rocklin Manufacturing Co. by phone or by email.

Below is a Full List of Rocklinizer Parts & Accessories:

 

 
ROCKLINIZER MODELS
950  ROCKLINIZER, #950-400 Rotary Applicator, Electrode Package, and Instruction Manual
850  ROCKLINIZER, #950-400 Rotary Applicator, Electrode Package, and Instruction Manual
600  ROCKLINIZER, #9250-A Applicator, Electrode Package, and Instruction Manual
500  ROCKLINIZER, #9250-A Applicator, Electrode Package, and Instruction Manual
380  ROCKLINIZER, #9250-A Applicator, Electrode Package, and Instruction Manual
380AKM  KNIFE MAKER'S MODEL, #9250-A Applicator, Electrode Package, and Instruction Manual
 
ROCKLINIZER ELECTRODES DIAMETER
8213  Tungsten Carbide (Green) 1/16" dia.  x 2"
8212  Tungsten Carbide (Green) 3/32" dia.  x 2"
8211  Tungsten Carbide (Green) 1/8" dia.  x 2"
8210  Tungsten Carbide (Green) 3/16" dia.  x 2"
8209  Tungsten Carbide (Green) 1/4" dia.  x 2"
9253  Titanium Carbide (Red) 3/32" dia.  x 2"
9252  Titanium Carbide (Red) 1/8 " dia.  x 2"
9251  Titanium Carbide (Red) 3/16" dia.  x 2"
9312  Rockhard (Blue) 1/8" dia.  x 4"
9314  Rockhard (Blue) 3/16" dia.  x 4"
 
ROCKLINIZER MINI ELECTRODES
8335-A  Mini Electrode Holder - with 1 mini electrode of your choice:
8235  Tungsten Carbide .020" dia.  x 2"
8236  Tungsten Carbide .030" dia.  x 2"
8237  Tungsten Carbide .040" dia.  x 2"
 
ROCKLINIZER ACCESSORIES
950-400  Rotary Applicator (for use with Models 950 / 850 / 800)
800-460  Magnetic Ground (for use with any Model)
9250-A  Applicator (for use with Models 369 / 380 / 500 / 600)
9207-A  Tool Post Applicator with Mounting Assembly (for use with Models 369 / 380 / 500 / 600)
400-401  Keyless Chuck (For Use With Any Model)
950-700   Automation Package (for use with Model 950 only; must be requested at initial order)
9400   Rocklinizer Cart (For Use With Any Model)


VIEW ROCKLINIZER VIDEOS »